落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压值小交流电冲击试验装置仪(耐焊弧冲击试验装置仪)-(折算机抑制)

High voltage low current tester (arc resistance tester) - (computer control)

品牌名字大全:耐电弧试验机

Product name: electric arc resistance tester

新产品主要参数:NDH-A

Product model: NDH - A

符合基准:GB/T 1411-2002《液态绝缘带食材耐高压得很低电流量弧光击穿的试验检测》(共同IEC  61621-1997)及ASTM D495等标准规定的想要的设计创造的,并遵循IEC 149、UL 746A等试验检测做法

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

最主要常用範圍及工作:

本可靠性实验机是依据适主要用于交流接触器、电子产品和家庭装电子产品等行业中的电工作业用氟橡胶、环氧光敏树脂胶和隔绝漆等隔绝建材的耐脉冲能认定,主主要用于固态物隔绝建材如:氟橡胶、保护膜、环氧光敏树脂、黑云母、卫浴陶瓷、的玻璃、隔绝油、隔绝漆、硬纸板等导电介质的耐脉冲能检查;

本冲击试验仪由估算机操作开机运行,都可以现示所选调查状态下及调查日期,调查结束了之后并包存所选调查统计资料,并可打印出.标准的实验设计数据。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 远程服务器为前后左右集成节构,上方为实际系统软件软件,上方为经过多次实验发现箱。

2 本成品用*新智力管控枝术,借助的选择流程(IEC或ASTM)可自动式来进行现场实验,并在线上上展示实验设计历程和最终。

3 **使用性能优质,抗影响技能强,测试英文精密度不高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断日期随机误差:大于 ±10ms

2 调压器使用量:2kVA

3 稳定实验交流电压:12.5kV

4 耐压直流电压可靠性强,精密度:±3%

5 工作电流保持精确:±10%  工作电流測量表面粗糙度:1.5%

6 金属电极对坯料重压:(0.5±0.05)N

7 电级素材:钨棒

8 金属电极远距离:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 使用的环镜温:(23±2)℃

10 的使用区域内部含水率:(50±5)%

11 主机电源:220V±5%  50Hz  10A

12 试验装置    技术:   国家行业标准/美标/10 mA 不断/20 mA 陆续/30 mA多次/40 mA间断性

13 应力测试编译程序正确:

编译程序段

电孤电压

mA

电弧焊接通断时刻s

各执行程序段保持的时间s

耐压试验总时期s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

陆续通

60

240

5

20

不断通

60

300

6

30

陆续通

60

360

7

40

间断性通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

号码

命名

量

微信备注

01

耐电孤测试检测仪

两台

 

02

探针系统的

一整套

 

03

金属电极支架

一款

 

04

24v电源落球回弹试验仪,介电击穿强度测定仪

一整套

 

05

接地保护放**

一只

 

06

电压毫安表

整台

 

07

台式电脑测控系统软件

一种

 

08

试件架

一根

 

09

参比电极间距规定块

2块

 

10

的视角标准规定块

2块

 

11

陶瓷厂家片

2片

 

12

喷墨复印机机

1台

品牌标志

13

计算出来机

1台

高端品牌

14

使用的介绍书

1份

 

15

通过证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 货品款式:

NDH-A    耐焊弧现场实验仪-微机抑制

NDH-B    耐弧光检测仪-触屏屏调节

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 机械鲁工 机械鲁工 机械鲁工